Grease Traps 101: The Specifics of Grease Trap Cleaning in Strafford County, NH
February 13, 2019 10:44 pm Leave your thoughtsCleaning a window is pretty straightforward. Cleaning gutters may be more complex, but you’re probably familiar with that process as well. What about grease trap cleaning in Strafford County, NH? What does it take to properly clean one of these?
For healthy maintenance of your commercial kitchen, this task is essential. To get it right, use the following guide to grease trap cleaning in Strafford County, NH:
- Gather the necessary tools: For grease trap cleaning in Strafford County, NH, you’ll need a few essentials. First, be sure to wear appropriate protective gear. Gloves, a mask and safety glasses are all a good idea. Keep in mind this job can be messy, so don’t dress in your Sunday best. Grease trap designs vary, but you’ll probably need a screwdriver, empty tubs, brush, scraper, scouring pad, a scoop, and containers to dispose of the waste.
- Open the trap: Establish a safe surface where you can place the lid of the grease trap once it is removed. You may simply choose a spot on the floor near the grease trap and cover it with rags to protect the flooring. Then, remove the grease trap cover and place it in this designated spot, out of your way.
- Strain the solids: Place a colander or other straining device in a bucket near the grease trap. Using a scoop, skim the surface of the liquid in the grease trap to collect grease that is floating on the surface of the trap. Pour the scooped material over the colander to separate the solids from the liquids.
- Complete the bailing: Once most of the liquid has been removed from the grease trap, the colander will no longer be useful. Remove the strainer, disposing of the solids that have accumulated. Then, continue to scoop out the solids from the grease trap into the bucket.
- Remove the parts: If your grease trap features plates or other removable parts, remove these for cleaning. These parts should be washed thoroughly.
- Scrub the trap: Once the trap is empty, using a scouring pad or sponge, clean the interior of the grease trap. It can be helpful to use a sprayer first to loosen up the grime on the trap’s interior surface. Scrapers and brushes can also help to reach small areas or remove tough grime.
- Soak up the water: Use a rag to soak up any remaining water in the grease trap.
- Reassemble the parts: Return plates and other parts to their correct positioning in the grease trap.
- Close the trap: Clean the lid and place it back on the trap.
- Dump the waste: Properly dispose of all waste removed from the grease trap. Solids and liquids must be handled differently to prevent spills and leaks. If you’re unsure of proper disposal methods, check with your local experts in grease trap cleaning in Strafford County, NH.
Of course, if you’d like to skip all 10 of these steps, just take one: contact the professionals at B.H. Cameron Septic Services LLC. We offer expert grease trap maintenance to keep your system running optimally. Reach out to our technicians today to make arrangements for your next service.
Categorised in: Grease Trap Cleaning
This post was written by Writer